Rubber brakelight switch cover, 90 Degree

Also known as Guzzi ref. 10352710

 More than 5 in stock

12735100-z 12735100 GU12735100 12 73 51 00
 1273 5100 1273.5100 12.73.51.00

Front brake master cylinder cap and rubber kit for Brembo PS 13 / PS16 master cylinder. Screw holes parallel to top and bottom edges

Brembo ref. 110430860

 1 in stock

Also fits Ducati 907 i.e.

Rebuild kit for Brembo PS 13 handlebar mounted brake and clutch master cylinders, includes all seals, return spring and brake grease. Piston is hollow

This seal kit is for Cali 1100 master cylinders with a hollow pivot pin, does not fit early models with a solid pivot pin. For Cali EV models this only fits master cylinders with a pair of screws in the middle of the cap, it does not fit the later master cylinder which has diagonally opposed screws. Also know as Guzzi ref. 28659378, 000043851, 30659330. NB Included instructions may refer to rear master cylinder applications rather than front. Brembo ref. 110436250

 3 in stock

Also fits Cagiva Elefant E750, Ducati 748

Brembo brake master cylinder overhaul kit for overhauling foot operated PS 15 master cylinders on linked systems. Includes all seals and brake grease

This seal kit replaces Guzzi part numbers 17659350, 66139790. Brembo ref. 110273920. This repair kit also used on some Cagiva 650 Elefant models and Benelli Sei. Some Nevada 750 models use BRA14701, check your rear master cylinder before ordering. See this link for help with fitting this kit. Supercedes front kit BRA11043
Note that this kit is only for PS15 models where the piston is retained by a ring, if your master cylinder has a circlip retaining the piston then you have a PS 16 and you will need to replace the whole master cylinder - see BRA19001 for a replacement

 More than 5 in stock

 10273920 GU10273920 10 27 39 20
 1027 3920 1027.3920 10.27.39.20

Also fits Benelli Sei, Cagiva Elefant, Ducati 600 SL Pantah, Ducati 750/900 SS, Ducati 860/900 GTS, Ducati 900 Darmah, Ducati 900 MHR, Ducati 1000 MHR, Ducati 750 Sport (1972-1974), Laverda Jota

Brembo PS 12 front master cylinder overhaul kit / rebuild kit for models with a trapezoid handlebar mounted reservoir

This seal kit is also known as Brembo ref. 10.4090.20

 Sorry, this part is no longer available.

 28659300 GU28659300 28 65 93 00
 2865 9300 2865.9300 28.65.93.00

M12 pivot bolt kit for brake and gear lever pivots on Tonti framed models. Kit consists of 1 M12 bolt (with hex head and slotted other end), wavy washer, flat washer and half nut

Beautifully made to enhance the appearance of your bike, also cheaper than OE non stainless parts. Guzzi parts refs: 30252360, 98073660, 95100409, 92701120, 17252350. Does not fit G5

 More than 5 in stock

98053660-z 98053660 GU98053660 98 05 36 60
 9805 3660 9805.3660 98.05.36.60

Pair of EBC FA018 brake pads for P2 F08 (P8) calipers.

For P08/F08 calipers. Front and rear pads for all models except P9 equipped Spada where these are only for front calipers

 5 in stock

28654601-z 28654601 GU28654601 28 65 46 01
 2865 4601 2865.4601 28.65.46.01

Also fits Benelli 354 Rear, Benelli Sei Fronts, Ducati 250/350/450 Desmo Fronts (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso Fronts (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2 Fronts, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 RGS Corsa Rear, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ 125/150/250/300 Fronts (1985-1992), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)

Pair of EBC FA018HH double-H sintered brake pads for P2 F08 (P8) calipers, best suited for fast road use. These give better braking but will wear brake discs more quickly than standard EBC pads

For P2 F08 calipers. Front and rear pads for all models except P9 equipped Spada where these are only for front calipers.
With the highest friction rating and a lifetime which is the envy of other Brake Pad Manufacturers, the Double-H pads are now available in a new quieter running, faster bedding formulation. NB if opting for sintered pads use them all round

 4 in stock

28654601-z 28654601 GU28654601 28 65 46 01
 2865 4601 2865.4601 28.65.46.01

Also fits Benelli 354, Benelli Sei, Ducati 250/350/450 Desmo (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ 125/150/250/300 (1985-1992), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)

Pair of Ferodo high performance brake pads FDB148, asbestos free and made in the UK

For P08/F08 calipers. Front and rear pads for all models except P9 equipped 1000 SP where these are only for front calipers
Ferodo's racing materials have had more wins over the past 50 years than any manufacturer in the world. From the demands of the Isle of Man TT to the circuits of the World Superbike, our organic racing range has provided the performance and modulation required by the world's best riders.
Developed from Ferodo's extensive racing history, unrivalled by any of our competitors Highest friction level available for motorcycle racing Developed by world champions for future world champions Stable friction level achieving excellent modulation Fast bedding-in period Applications to fit all major racing calipers Suitable for stainless steel and cast iron discs

 This part is due back in stock soon, call 01484 841395 to reserve yours

28654601-z 28654601 GU28654601 28 65 46 01
 2865 4601 2865.4601 28.65.46.01

Also fits Benelli 354 Rear, Benelli Sei Fronts, Ducati 250/350/450 Desmo Fronts (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso Fronts (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2 Fronts, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 RGS Corsa Rear, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ 125/150/250/300 Fronts (1985-1992), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)

Rear brakeline from splitter or proportioning valve to rear caliper fixed pipe. Also used as lower front right hand pipe to caliper fixed pipe on T3

Original type rubber brakeline with chunky galvanized ends

 This part is due back in stock soon, call 01484 841395 to reserve yours

17657550